| Various Axle-toyota | |
|
Various Axle-toyota#P9T1001
| 0.71 € |
|
[48h · add]
8/1988-7/1997 · JOINT ENTRE FUSEE ET PIVOT GASKET SWIVEL SPINDLE HUB · ·
|
| ARB Differential Locker | |
|
ARB Differential Locker#PBA1000
| 1,116.00 € |
|
[48h · add]
8/1988-7/1997 · Differential locker pneumatic ARB; supplyed with all accessories (switch, wire set, electrovane...) except compressor · ·
|
|
ARB Differential Locker#PBA1000
| 1,116.00 € |
|
[48h · add]
8/1988-7/1997 · Differential locker pneumatic ARB; supplyed with all accessories (switch, wire set, electrovane...) except compressor · ·
|
| Crush Sleeve | |
|
Crush Sleeve#PBE1004
| 21.00 € |
|
[48h · add]
8/1988-7/1997 · AVANT (front) bague deformable entre les 2 roulements de pignon collapsible sleeve between the 2 bearings of the p · ·
|
|
Crush Sleeve#PBE1004
| 21.00 € |
|
[48h · add]
8/1988-7/1997 · ARRIERE (rear) bague deformable entre les 2 roulements de pignon collapsible sleeve between the 2 bearings of the p SANS BLOCAGE DE DIFFERENTIEL / NO DIFF LOCK · ·
|
|
Crush Sleeve#PBE1001
| 16.00 € |
|
[48h · add]
8/1988-7/1997 · ARRIERE (rear) bague deformable entre les 2 roulements de pignon collapsible sleeve between the 2 bearings of the p AVEC BLOCAGE DE DIFFERENTIEL / WITH DIFF LOCK · ·
|
| Diferential Locker | |
|
Differentiel A Glissement Limite True Trac#PBL1027
| 750.00 € |
|
[48h · add]
8/1988-7/1997 · POUR MODELE AVANT 1990 GLISSEMENT LIMITE AVANT- TRUE TRAC · ·
|
| Crown Wheel & Pinion | |
|
Crown Wheel and Pinion#PCC1002
| 456.00 € |
|
[48h · add]
8/1988-7/1997 · AVT (front)/ARRIERE (rear) Rapport 10X43 · ·
|
|
Crown Wheel and Pinion#PCC1003
| 456.00 € |
|
[48h · add]
8/1988-7/1997 · AVT (front) / ARR (rear) Rapport 9X41 · ·
|
|
Crown Wheel and Pinion#PCC1069
| 630.00 € |
|
[48h · add]
8/1988-7/1997 · Arrière ratio 5.71 Amélioration de performance (extrèmement court) Rear, ratio: 5.71 Performance improved (extremely short) · ·
|
|
Crown Wheel and Pinion#PCC1077
| 580.00 € |
|
[48h · add]
8/1988-7/1997 · Avant, Ratio 5.71 diam. couronne: 190.5mm Amélioration de performance (extrèmement court) Front, ratio: 5.71 ring diameter: 7.5" (190.5mm) High Performace ratio (extremely short) · ·
|
|
Crown Wheel and Pinion#PCC1023
| 450.00 € |
|
[48h · add]
8/1988-7/1997 · AVANT (front) ratio 5,29 Amélioration de performance (très court Performance ratio (very short) · ·
|
|
Crown Wheel and Pinion#PCC1024
| 450.00 € |
|
[48h · add]
8/1988-7/1997 · AVANT (front) Rapport 9X41 ratio 4.56 Diam couronne(ring) 205mm · ·
|
|
Crown Wheel and Pinion#PCC1056
| 630.00 € |
|
[48h · add]
8/1988-7/1997 · ARRIERE, Ratio 5.29 Amelioration de performance (très court) REAR, Ratio 5.29 Parformance ratio (very short) · ·
|
|
Crown Wheel and Pinion#PCC1030
| 480.00 € |
|
[48h · add]
8/1988-7/1997 · AVANT (front) Ratio4,88 8x39 Diam courrone (ring) 190,5mm ep 35mm · ·
|
| C.V. Joint | |
|
C.V. Joint#PCV1032
| 90.00 € |
|
[48h · add]
8/1988-7/1997 · PONT AVANT RIGIDE · ·
|
| Wheel Nut | |
|
Wheel Nut#PER2115
| 1.40 € |
|
[48h · add]
8/1988-7/1997 · AVANT (front) + ARRIERE (rear) standard noir / black standard · ·
|
|
Wheel Nut#PER2114
| 2.75 € |
|
[48h · add]
8/1988-7/1997 · fermé court AVANT (front) + ARRIERE (rear) Chromé / chrome plated · ·
|
| Cap Flange C.V. Joint | |
|
Cap Flange C.V. Joint#PFB1000
| 1.60 € |
|
[48h · add]
8/1988-7/1997 · part on drawing: n°: 1 · ·
|
| Snap Ring Flange - C.V. Joint | |
|
Snap Ring Flange - C.V. Joint#PFC1000
| ––.–– € |
|
[special order]
8/1988-7/1997 · left or right, price per unit - part on drawing: n°: 2 · ·
|
| Stud Flange - Hub | |
|
Stud Flange - Hub#PFK1000
| ––.–– € |
|
[special order]
8/1988-7/1997 · content: 1 stud + 1 tappered whasher + 1 lock washer + 1 nut; price of set - part on drawing: n°: 6 · ·
|
| Pin (centering) Flange - Hub | |
|
Pin (centering) Flange - Hub#PFP1000
| 0.80 € |
|
[48h · add]
8/1988-7/1997 · Front - left or right side; quantity per hub: 2, matches flange PFL1026 or PFL1040 - price per unit - part on drawing: n°: 5 · ·
|
| Wheel Stud | |
|
Wheel Stud#PGS1015
| 4.50 € |
|
[48h · add]
8/1988-7/1997 · noir long totale 50mm ARRIERE (rear) prix par unité / price per unit · ·
|
|
Wheel Stud#PGS1016
| 4.50 € |
|
[48h · add]
8/1988-7/1997 · chrome long totale 59mm AVANT (front) prix par unité / price per unit · ·
|
| Install Kit Diff. Lock ARB | |
|
Install Kit Diff. Lock ARB#PKB1002
| 68.00 € |
|
[48h · add]
8/1988-7/1997 · fitting kit to match ARB differential locker : PBA1000 · ·
|
| Differential Rebuilt Kit | |
|
Differential Rebuilt Kit#PKD1003
| 220.00 € |
|
[48h · add]
8/1988-7/1997 · Front, matches axle non fitted with Toyota genuine diffrential lock; content: side gears, sattelites, shaft and shims; price per kit · ·
|
| Nut & Locking Ring Kit Spindle | |
|
Nut & Locking Ring Kit Spindle#PKE1000
| 3.10 € |
|
[48h · add]
8/1988-7/1997 · left or right side - price per unit - parts on drawing: n°: 1 · ·
|
| Kit Stud & Nut | |
|
Kit Stud & Nut#PKG1000
| 7.59 € |
|
[3 wks · add]
8/1988-7/1997 · set of 6 ref PKF1000; price per set of 6 - part on drawing: n°: 6 · ·
|
|
Kit Stud & Nut#PKG1002
| 1.95 € |
|
[48h · add]
8/1988-7/1997 · Stud and nut kit to fit left or right lower swivel. Content: 1 stud, 1 nut, 1 locking washer and 1 tappered split washer. Qantity needed per swivel: 4 units. Price per kit · ·
|
| Seal Kit Steering Knuckle | |
|
Seal Kit Steering Knuckle#PKJ1000
| ––.–– € |
|
[special order]
8/1988-7/1997 · left or right side - price per unit - part on drawing: n°: 4 · ·
|
| LSD Internal Kit | |
|
LSD Internal Rebuilt Kit#PKL1000
| ––.–– € |
|
[special order]
8/1988-7/1997 · Rear, content; all clutch plates & washers, satellite washers, spring and spider; price per kit · ·
|
| Swivel Rebuilt Kit | |
|
Swivel Rebuilt Kit#PKP1406
| 65.00 € |
|
[2 mos · add]
8/1988-7/1997 · Complete kit including all bearings, oil seals, gaskets, washers etc...for both sides; made of non genuine parts · ·
|
|
Swivel Rebuilt Kit#PKP2027
| 124.00 € |
|
[48h · add]
8/1988-7/1997 · identical to PKP1406 with OE quality components (Koyo, Nashi or NSK bearings, AAMANDO or NOK seals and rings) · ·
|
| Wheel Bearing Kits | |
|
Wheel Bearing Kit#PKR1067
| 43.00 € |
|
[48h · add]
8/1988-7/1997 · Front - left or right side - content: all bearings and seals for one side; price per kit · ·
|
|
Wheel Bearing Kit#PKR6072
| 76.01 € |
|
[48h · add]
8/1988-7/1997 · Front,left or right; bearings brand KOYO (O.E. manufacturing); content: 2 bearings, hub oil seal, 2 nuts, nut lock, and washer; price per kit · ·
|
|
Wheel Bearing Kit#PKR5068
| 55.00 € |
|
[48h · add]
8/1988-7/1997 · ARR, Gauche ou Droit, Pour frein arr à tambours Pièce adaptable; cont: Roulement, Spis, Bagues REAR, Left or Right, (Rear drum brakes) Non genuine parts ; incl: bearing, oil seals, lock · ·
|
| Oil Seal Kit | |
|
Oil Seal Kit Rear Wheel#PKS1004
| 20.50 € |
|
[48h · add]
8/1988-7/1997 · Rear, Left or right output (for 1 side) incl: 2 oil seals, 1 O ring, 1 locking ring and 1 circlips · ·
|
|
Oil Seal Kit#PKS1009
| 21.99 € |
|
[48h · add]
8/1988-7/1997 · Front, left or right; seal kit to fit the hub only (not the swivel); content 2 oil seals, 1 spindle gasket and 1 nut lock; Price per kit · ·
|
| Differential Gear Set | |
|
Differential Gear Set#PKT1002
| ––.–– € |
|
[special order]
8/1988-7/1997 · Rear, set of 2 side gears and 4 satellites; fits limited slip differential; matches PKL1000; price per kit · ·
|
| Diff & Pinion Bearing Kit | |
|
Differential & Pinion Bearing Kit#PKZ1156
| 180.00 € |
|
[48h · add]
8/1988-7/1997 · ARR(rear) ou AV(FRONT) Diametre ext. gros roulement: 80 mm voir détail kit => · ·
|
| Automatic Free Wheel Set | |
|
Automatic Free Wheel Set#PMA8001
| 605.00 € |
|
[special order]
8/1988-7/1997 · Nb trous: 6 Nb can.: 26 La paire · ·
|
| Manual Free Wheel Set | |
|
Manual Free Wheel Set#PMD8017
| 240.00 € |
|
[48h · add]
8/1988-7/1997 · en remplacement des moyeux manuels d'origine; prix à la paire · ·
|
| Hub Assembly | |
|
Hub Assembly#PMO1021
| 165.00 € |
|
[3 wks · add]
8/1988-7/1997 · Front, left or right supplied without bearings; price per unit · ·
|